All prices discounted net
Ultra-light-duty, L-profile channel
- Material composition: S280 or better steel
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 1.2 mm
BD 1.01
Ultra-light-duty, L-profile channel
- Material composition: S280 or better steel
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 1.5 mm
BD 1.67
Light-duty profile channel for trapezes
- Material composition: S280 or better steel
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 1.75 mm
BD 2.82
Light-duty profile strut channel, for outdoor use with low pollution
- Material composition: S280 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 1.75 mm
BD 3.15
Strut channel
- Material composition: S250 or better steel
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 2 mm
BD 15.74
Punched and slotted strut channel, for outdoor use with low pollution
- Material composition: S250 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 2 mm
BD 20.59
Strut channel for trapezes
- Material composition: S280 or better steel
- Surface finish: Indoor Coated - Pre-galvanized
- Environmental conditions: Dry indoor environments (C1) or indoor with temporary condensation (C2)
BD 18.50
Strut channel, for outdoor use with low pollution
- Material composition: S280 or better steel
- Surface finish: Outdoor Coated - ZM
- Environmental conditions: Outdoor, low to moderate pollution (C3)
BD 20.32
MT-40 Strut channel
New product
Strut channel
- Material composition: S280 or better steel
- Surface finish: Indoor Coated - Pre-galvanized
- Environmental conditions: Dry indoor environments (C1) or indoor with temporary condensation (C2)
BD 20.99
MT-40 OC Strut channel
New product
Strut channel, for outdoor use with low pollution
- Material composition: S280 or better steel
- Surface finish: Outdoor Coated - ZM
- Environmental conditions: Outdoor, low to moderate pollution (C3)
BD 23.71
MT-50 Strut channel
New product
Strut channel
- Material composition: S280 or better steel
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 2.75 mm
BD 36.93
MT-50 OC Strut channel
New product
Strut channel, for outdoor use with low pollution
- Material composition: S280 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 2.75 mm
BD 42.26
MT-60 OC Strut channel
New product
Strut channel, for outdoor use with low pollution
- Material composition: S280 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 2.75 mm
BD 63.32
MT-40D Double strut channel
New product
Back-to-back double strut channel
- Material composition: S280 or better steel
- Surface finish: Electro galvanized - for dry indoor use only
- Material thickness: 2 mm
BD 102.75
MT-40D OC Double strut channel
New product
Back-to-back double strut channel, for outdoor use with low pollution
- Material composition: S280 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 2 mm
BD 140.05
MT-70 OC Girder
New product
Square box section, for outdoor use with low pollution
- Material composition: S350 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 2.75 mm
BD 136.55
MT-80 OC Girder
New product
Heavy-duty rectangular box section, for outdoor use with low pollution
- Material composition: S350 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 3 mm
BD 186.15
MT-90 OC Girder
New product
Heavy-duty square box section, for outdoor use with low pollution
- Material composition: S350 or better steel
- Surface finish: Zinc-Magnesium - for outdoor use
- Material thickness: 3 mm
BD 358.55
Cantilever arm with MT-40 strut channel
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 8 mm
From
BD 7.41
Cantilever arm with MT-40 strut channel, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Outdoor Coating
- Material thickness: 8 mm
From
BD 9.33
Cantilever arm with back-to-back MT-40 strut channels
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 10 mm
BD 21.04
MT-C-L1 Corner angle
New product
Angle bracket for assembling light-duty strut channel structures
- Material composition: Q355 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 6 mm
BD 0.61
MT-C-L1 OC Corner angle
New product
Angle bracket for assembling light-duty strut channel structures, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 6 mm
BD 0.71
MT-C-L2 Corner angle
New product
Elongated angle bracket for assembling strut channel structures
- Material composition: Q355 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 6 mm
BD 0.75
MT-C-L2 OC Corner angle
New product
Elongated angle bracket for assembling strut channel structures, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 6 mm
BD 0.94
MT-C-T/1 Transverse connector
New product
Wing fitting for assembling strut channel structures
- Material composition: Q355 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 6 mm
BD 2.49
MT-C-LL1 Angle connector
New product
Right-angle connector for assembling strut channel structures
- Material composition: Q355 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
BD 1.58
MT-C-LL1 OC Angle connector
New product
Right-angle connector for assembling strut channel structures, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
BD 2.09
MT-C-LL2 Angle connector
New product
Right-angle, elongated connector for assembling strut channel structures
- Material composition: Q355 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
BD 3.75
MT-C-T/2 Tee splice connector
New product
Node for assembling strut channels in a T shape
- Material composition: Q355 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
BD 4.22
Node for assembling strut channels in a T shape, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
BD 4.61
MT-C-T A OC Corner bracket
New product
Adjustable angle bracket for assembling strut channels in a T shape, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
BD 2.70
MT-C-T 3D/2 OC Wing fitting
New product
Double wing fitting for connecting three strut channels in a 3D structure, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 6 mm
BD 2.90
MT-C-T 3D/3 Wing fitting
New product
Triple wing fitting for connecting four strut channels in a 3D structure
- Material composition: Q355 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 6 mm
BD 3.61
MT-C-T 3D/3 OC Wing fitting
New product
Triple wing fitting for connecting four strut channels in a 3D structure, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 6 mm
BD 4.28
MT-ES-40 Splice clevis
New product
Splice connector for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D)
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
BD 2.48
MT-ES-40 OC Splice clevis
New product
Splice connector for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D)
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
BD 2.73
MT-C-GS OC Angle bracket
New product
Braced angle bracket for heavy-duty strut channel structures subject to 3D loads, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 3 mm
BD 3.39
MT-C-GL OC Angle bracket
New product
Braced angle bracket for heavy-duty MT girder structures subject to 3D loads, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
BD 8.52
MT-C-GSP L OC Gusset plate
New product
Gusset plate for L-shaped connections with MT-70 and MT-80 girders, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
BD 2.61
MT-C-GSP T OC Gusset plate
New product
Gusset plate for T-shaped connections with MT-70 and MT-80 girders, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
BD 2.65
MT-C-GLP T OC Gusset plate
New product
Gusset plate for T-shaped connections with MT-80 or MT-100 girders, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
BD 4.95
MT-ES-90 OC Splice clevis
New product
Splice connector for coupling MT-90 or MT-100 girders end-to-end, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 6 mm
BD 25.04
MT-ES-70 OC Splice clevis
New product
Splice connector for coupling MT-70 or MT-80 girders end-to-end, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 5 mm
BD 10.12
MT-B-L Light-duty baseplate for strut channels
New product
Base connector for anchoring light-duty strut channel structures to concrete or steel
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
BD 0.73
MT-B-L OC Light-duty baseplate
New product
Post base connector for anchoring light-duty strut channel structures to concrete or steel, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
BD 0.85
MT-B-T Light-duty baseplate
New product
Base connector for anchoring light-duty strut channel structures to concrete or steel
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
BD 1.90
MT-B-T OC Light-duty baseplate
New product
Base connector for anchoring light-duty strut channel structures to concrete or steel, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
BD 2.88
MT-B-O2 Baseplate for strut channels
New product
Base connector for anchoring strut channel structures to concrete or steel
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
BD 5.04
MT-B-O2 OC Baseplate
New product
Base connector for anchoring strut channel structures to concrete and steel, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
BD 5.34
MT-B-O2B 3D-load baseplate
New product
Base connector for anchoring strut channel structures under 3D loading to concrete or steel
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 8 mm
BD 9.42
MT-B-O2B OC 3D-load baseplate
New product
Base connector for anchoring strut channel structures under 3D loading to concrete and steel, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 8 mm
BD 11.61
MT-B-O4 3D-load baseplate
New product
Base connector for anchoring strut channel structures under 3D loading to concrete and steel or steel
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 8 mm
BD 12.25
MT-B-GS T OC Girder baseplate
New product
Base connector for anchoring MT-70 and MT-80 girder structures to concrete and steel, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 8 mm
BD 17.24
MT-B-GS O4U OC Medium-duty baseplate
New product
Base connector for anchoring MT-70 and MT-80 girder structures to concrete, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 12 mm
BD 27.49
MT-B-GL O4 OC Heavy-duty baseplate
New product
Base connector for anchoring 3D, heavy-duty MT-90 girder structures to concrete, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 12 mm
BD 56.62
MT-B-GXL O4 OC Heavy-duty baseplate
New product
Base connector for anchoring 3D, heavy-duty MT-100 girder structures to concrete, for outdoor use with low pollution
- Material composition: Q355 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 12 mm
BD 77.55
MT-BC-GS T OC Beam clamp
New product
Beam clamp for fastening MT-70 and MT-80 girders to steel beams, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Environmental conditions: Outdoor, low to moderate pollution (C3)
BD 16.43
MT-AB A Adjustable brace fitting
New product
Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
BD 1.84
MT-AB A OC Adjustable brace fitting
New product
Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
BD 2.03
MT-AB-L 45 Angle brace
New product
45-degree angle brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
BD 2.55
MT-AB-L 45 OC Angle brace
New product
45-degree angle brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
BD 2.82
MT-AB-LL2 45 45-degree angle bracket
New product
45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures
- Material composition: Q235 or better steel
- Surface finish: Pre-galvanized - for dry indoor use only
- Material thickness: 4 mm
BD 3.07
MT-AB-LL2 45 OC 45-degree angle bracket
New product
45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
BD 3.33
MT-AB-G T Adjustable brace fitting
New product
Adjustable brace fitting for assembling MT girder structures, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
- Material thickness: 4 mm
BD 2.42
MT-TLB Twist-Lock bolt
New product
Hexagon bolt for use with Twist-Locks when assembling strut channel structures
- Material composition: ISO 898-1 8.8
- Surface finish: Pre-galvanized - for dry indoor use only
- Environmental conditions: Dry indoor environments (C1) or indoor with temporary condensation (C2)
BD 0.11
MT-TLB OC Twist-Lock bolt
New product
Hexagon bolt for use with Twist-Locks when assembling strut channel structures, for outdoor use with low pollution
- Material composition: ISO 898-1 8.8
- Surface finish: Hot-dip galvanized plus - for outdoor use
- Environmental conditions: Outdoor, low to moderate pollution (C3)
BD 0.15
MT-TFB OC Thread forming bolt
New product
Thread-forming bolt for use when assembling MT girder structures, for outdoor use with low pollution
- Material composition: High Strength Steel
- Surface finish: Hot-dip galvanized plus - for outdoor use
- Environmental conditions: Outdoor, low to moderate pollution (C3)
BD 0.27
MT-EC-20 Strut end cap
New product
Channel end cap for MT-20 strut channels
- Material composition: PPB-M02
BD 0.10
MT-EC-30 Strut end cap
New product
Channel end cap for MT-30 strut channels
- Material composition: PPB-M02
BD 0.11
MT-EC-40/50 Strut end cap
New product
Channel end cap for MT-40 and MT-50 strut channels
- Material composition: PPB-M02
BD 0.14
MT-EC-60 Strut end cap
New product
Channel end cap for MT-60 strut channels
- Material composition: PPB-M02
BD 0.16
MT-EC-70 Girder end cap
New product
Channel end cap for MT-70 girders
- Material composition: PPB-M02
BD 0.21
MT-EC-80 Girder end cap
New product
Channel end cap for MT-80 girders
- Material composition: PPB-M02
BD 0.33
MT-EC-90 Girder end cap
New product
Channel end cap for MT-90 girders
- Material composition: PPB-M02
BD 0.43
Nut for attaching media to MT strut channels
- Material composition: High Strength Steel
- Surface finish: Pre-galvanized - for dry indoor use only
From
BD 0.35
Nut for attaching media to MT strut channels, for outdoor use with low pollution
- Material composition: High Strength Steel
- Surface finish: Hot-dip galvanized plus - for outdoor use
From
BD 0.45
One-hole hinged connector for assembling seismic bracing of MT strut channel framing
- Material composition: Q355 or better steel
- Surface finish: Indoor Coated - Electro galvanized
BD 1.76
Fixation plate with threaded hole for attaching media to strut channels
- Material composition: Q235 or better steel
- Surface finish: Indoor Coated - Electro galvanized
From
BD 0.11
Fixation plate with threaded hole for attaching media to strut channels, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Outdoor Coated (HDG)
From
BD 0.14
Slotted angle plate for attaching media to MT girders, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Hot-dip galvanized - for outdoor use
From
BD 0.90
Fixation plate with threaded hole for attaching media to strut channels
- Material composition: Q235 or better steel
- Surface finish: Indoor Coated - Electro galvanized
From
BD 0.25
MT-FPT OC Threaded strut plate
New product
Fixation plate with threaded hole for attaching media to strut channels, for outdoor use with low pollution
- Material composition: Q235 or better steel
- Surface finish: Outdoor Coated (HDG)
From
BD 0.27
Hilti Website